Höen customer
install - Porsche Turbo
dLED License plate
bulbs
The dLED license plate
bulb features a dramatic increase in luminosity over the factory bulbs
in a simple 10 minute installation.
Step 1 -: Using a
Philips screwdriver remove one screw completely. Remove the second
screw 90%, leaving it in partially allows you to pull down on it to
remove the assembly from its housing. Repeat this on both sides.
Step 2 -: Remove
the factory bulbs from the clip on the underside of the housing.
Repeat on the second housing.
Step 3 -: Replace
with the Hoën dLED bulbs, make sure the twin LED's are facing towards
the lens of the housing assembly.
Step 4 -:
Reversing step 1, simply press in the housings and test the bulbs.
Then simply hand tighten the screws to secure the housings in place.
Hoën dLED (left) vs. factory
Step 5 -: Perform
reinstallation of the second assembly to complete.
